Snmp Community - Planet WGS-4215-T User Manual

4.2.7.5 SNMP Community

Configure SNMP Community on this page. The SNMP Community screens in
The page includes the following fields:
Object
•
Community Name
• Community Mode
• Group Name
• View Name
•
Access Right
Buttons
: Click to apply changes.
Figure 4-2-27 Community Setting Page Screenshot
Description
Indicates the community read/write access string to permit access to SNMP
agent.
The allowed string length is 0 to 16.
Indicates the SNMP community supported mode. Possible versions are:
Basic: Set SNMP community mode supported version 1 and 2c.

 Advanced: Set SNMP community mode supported version 3.
A string identifying the group name that this entry should belong to.
The allowed string length is 1 to 16.
A string identifying the view name that this entry should belong to.
The allowed string length is 1 to 16.
Indicates the SNMP community type operation. Possible types are:
RO=Read-Only: Set access string type in read-only mode.
RW=Read-Write: Set access string type in read-write mode.
Figure 4-2-28 Community Status Page Screenshot
85
User's Manual of WGS Managed Series
Figure 4-2-27 & Figure 4-2-28 appear.