Filters - Planet WGSW-24000 User Manual

24-port 10/100/1000mbps ethernet security switch
Hide thumbs Also See for WGSW-24000:
Table of Contents

Advertisement

IP - IP is a network layer protocol that provides a connectionless service for the delivery of
data.
ARP - Address Resolution Protocol (ARP) is a low-level protocol that dynamically maps
network layer addresses to physical medium access control (MAC) addresses
IPX - The Internetwork Packet Exchange (IPX) is a connectionless datagram Network-layer
protocol that forwards data over a network.
VLAN - The VLAN ID associated with the group.
Slot.Port(s) - The interfaces associated with the group.

4.3.3 Filters

4.3.3.1 MAC Filter Configuration
Use this page to filter the MAC address transmitting on the port.
Non-Configurable Data
MAC Filter - This is the list of MAC address and VLAN ID pairings for all configured filters.
To change the port mask(s) for an existing filter, select the entry you want to change. To add
a new filter, select "Create Filter" from the top of the list.
Configurable Data
MAC Address - The MAC address of the filter in the format 00:01:1A:B2:53:4D. You can
only change this field when you have selected the "Create Filter" option.
You cannot define filters for these MAC addresses:
00:00:00:00:00:00
01:80:C2:00:00:00 to 01:80:C2:00:00:0F
01:80:C2:00:00:20 to 01:80:C2:00:00:21
Figure 4-41 Protocol-based VLAN Summary

Advertisement

Table of Contents
loading

Table of Contents