Table of Contents
Advertisement
The factory default is code.
Note that to download SSH key files SSH must be administratively disabled and there can be no
active SSH sessions.
TFTP Server IP Address - Enter the IP address of the TFTP server. The factory default is
0.0.0.0.
TFTP File Path - Enter the path on the TFTP server where the selected file is located. You
may enter up to 32 characters. The factory default is blank.
TFTP File Name - Enter the name on the TFTP server of the file you want to download. You
may enter up to 32 characters. The factory default is blank.
Start File Transfer - To initiate the download you need to check this box and then select the
submit button.
4.2.10.6 Upload File From Switch
Use this menu to upload a configuration or log file from the switch.
Configurable Data
File Type - Specify the type of file you want to upload. The available options are
Configuration, Error Log, System Trace, and Trap Log. The factory default is Error Log.
TFTP Server IP Address - Enter the IP address of the TFTP server. The factory default is
0.0.0.0
TFTP File Path - Enter the path on the TFTP server where you want to put the file being
uploaded. You may enter up to 32 characters. The factory default is blank.
TFTP File Name - Enter the name you want to give the file being uploaded. You may enter
up to 32 characters. The factory default is blank.
Figure 4-30 Download File To Switch
Advertisement
Table of Contents
