Rgbhv+Stereo To Catpro Boards With Txs & Rxs; Applicability Notice - AMX Modula Instruction Manual

RGBHV+Stereo to CatPro Boards with TXs & RXs

Applicability Notice

FIG. 36
RGBHV+Stereo to CatPro boards (shown with RGBHV/HD-15 and stereo audio boards)
This chapter pertains to Modula RGBHV+Stereo to CatPro boards contained in pre-engineered systems and
custom systems. The table on the following page shows the types of RGBHV+Stereo to CatPro boards and
their numbers and indicates the pre-engineered systems containing the boards that are available.
Modula CatPro boards must be used in conjunction with CatPro RGBHV+Stereo Transmitter (TX)
and/or Receiver (RX) Modules to make up a complete system. The third table on the following pages shows
the types of CatPro RGBHV+Stereo TX and RX modules and their numbers. For information on system
setup, see page 78.
CatPro boards work in conjunction with RGBHV/HD-15 and CatPro-compatible stereo audio boards.
Although other types of boards may be included in the CatPro RGBHV/HD-15 enclosure, they cannot
receive signals from CatPro input boards or route signals to CatPro output boards.
Modula Instruction Manual
RGBHV+Stereo to CatPro Boards with TXs & RXs
69