Cat5 Video And Audio Boards Specifications - AMX Modula Instruction Manual

Cat5 TX and RX AF-10 Boards and Numbers
Note: Specifications for these AF-10 boards are listed on page 126.
Cat5 S-Video+Stereo TX and RX AF-10 Boards
TX
FG1040-410
FG1040-413
FG1040-416
FG1040-419
FG1040-422
FG1040-440
FG1040-443
* High headroom – up to a +22 dBu signal

Cat5 Video and Audio Boards Specifications

Applies to Modula Cat5 Video and Audio input and output boards FG1034-488 and FG1034-494 when
used in conjunction with Cat5 TX and RX Modules or AF-10 boards.
Also applies to Cat5 Video and Audio boards contained in pre-engineered systems.
Video Specifications
Parameter
Frequency Response
Crosstalk
Differential Gain
Differential Phase
Signal to Noise Ratio
Input Level (max.)
Input Impedance
Output Level (max.)
Output Impedance
Signal Type
Supported Twisted-Pair
Cable Types
Connector Options
Modula Instruction Manual
RX
FG1040-425 RCA / RCA unbalanced
FG1040-428 S-Video / RCA unbalanced
FG1040-431 S-Video / 3-position unbalanced
FG1040-434 BNC / 3-position unbalanced
FG1040-437 BNC / RCA unbalanced
FG1040-446 S-Video / 3-position balanced (HH)*
FG1040-449 BNC / 3-position balanced (HH)*
Conditions
f = 35 MHz or better, 3 ft. (0.914 m)
f = 15 MHz or better, 300 ft. (91.44 m)
f = 10 MHz or better, 1000 ft. (305 m)
f = 5 MHz
f = 3.58 MHz, 10 to 90% APL
f = 3.58 MHz, 10 to 90% APL
Vin = 0.7 V, 100 IRE
Cat5 Video and Audio Boards with TXs & RXs
Connector Types
page 99
Value
±3 dB
±3 dB
±3 dB
<50 dB
<0.2% or better
<1º or better
>65 dB
±1 V
75 ohms
±1 V
75 ohms
Composite, S-Video
Cat5, Cat5e, Cat6
RJ-45
125