Standard Video Boards Specifications - AMX Modula Instruction Manual

Standard Video Boards
Applicability Table 3
Standard Video Boards in CatPro RGBHV/HD-15 and RGBHV/HD-15 Enclosures
Note: These standard video boards cannot work in conjunction with CatPro boards.
Standard Video Boards & Numbers
Note: Specifications for these boards are listed in
Specifications Table 3 (page 49).
Input - Standard Video
FG1034-647
Input - Standard Video, High Impedance
FG1034-650
Output - Standard Video
FG1034-659

Standard Video Boards Specifications

Specifications Table 1
Applies to Modula standard video boards listed in Applicability Tables 1A, 1B, and 1C (page 45 to
page 47).
Also applies to these standard video boards when contained in pre-engineered systems.
Specifications Table 1
Parameter
Frequency Response
Crosstalk
Differential Gain
Differential Phase
Signal to Noise Ratio (SNR)
Input Level (max.)
Input Impedance
Output Level (max.)
Output Impedance
Connector Type
48
Enclosure Types & Numbers
CatPro RGBHV/HD-15 (32x32)
FG1034-42
RGBHV/HD-15 (32x32)
FG1034-61
Conditions
1 to All
f = 5 MHz
f = 3.58 MHz
f = 3.58 MHz
Vin = 0.7 V, 100 IRE
Value
±3 dB to 50 MHz or better
±1 dB to 20 MHz or better
<-50 dB
<0.2% or better
<0.2º or better
>65 dB
±2.5 V
75 ohms
±2.5 V
75 ohms
BNC
Modula Instruction Manual