AMX Modula Instruction Manual page 25

Input and Output Boards
A single enclosure can handle a combination of signals (such as analog audio, analog video, sync,
digital video, etc.) depending on the number and type of input and output boards.
Board Signal Types
The table below indicates which enclosure types can hold which boards (signal types).
For information on the specific input and output boards in your system, including applicability numbers,
connector types, cabling or wiring directions, and specifications, see the applicable board chapter in this
manual (chapter title specifies the board's signal type).
Tip: If you are viewing this manual as a PDF, click on the page number for the Board (Signal Type)
Chapter in the table to go to that chapter.
Enclosure Types and Board Types
Enclosure Type
Standard Video
S-Video and Stereo
Wideband Video
Wideband and Stereo
RGBHV/HD-15
CatPro RGBHV/HD-15
SDI Digital Video
SDI Digital Video and Wideband Video
SDI Digital Video and Standard Video
SDI Digital Video and S-Video
RS-422
Cat5/Video and Audio
* For Standard Video, S-Video, Mono Audio, and Stereo Audio boards that are compatible with Cat5 Video and
Audio boards, see the applicable board chapter.
Expansion Board
Modula systems can be ordered with a Vertical Interval Sync board, FG1034-310, to synchronize video
signal switches with the output device's refresh rate (see page 177).
Modula Instruction Manual
Enclosure Configurations
Board (Signal Types) Chapter
19