Rgbhv/Hd-15 Specifications - AMX Modula Instruction Manual

RGBHV/HD-15 Boards

RGBHV/HD-15 Specifications

RGBHV/HD-15 and CatPro Enclosures – RGBHV/HD-15 to RGBHV/HD-15
Applies to Modula RGBHV/HD-15 boards FG1034-590 and FG1034-593 when contained in
RGBHV/HD-15 enclosures. Applies to these boards when contained in CatPro enclosures and switching to
RGBHV/HD-15 boards.
Also applies to these RGBHV/HD-15 boards when contained in preconfigured systems and switching to
RGBHV/HD-15 boards.
Specifications Table 1
Parameter
Frequency Response
Crosstalk
Signal to Noise Ratio (SNR)
Input Level (max.)
Input Impedance
Return Loss (Input)
Sync Input Level
Output Level (max.)
Output Impedance
Sync Output Level
Connector Type
CatPro Enclosures – RGBHV/HD-15 to CatPro
Applies to Modula RGBHV/HD-15 boards FG1034-590 and FG1034-593 when contained in CatPro
enclosures and switching to CatPro boards.
Also applies to these RGBHV/HD-15 boards when contained in preconfigured systems and switching to
CatPro boards.
Specifications Table 2
Parameter
Input Level (max.)
Input Impedance
Maximum Resolution
Crosstalk
Signal to Noise Ratio (SNR)
Return Loss (Input)
Sync Input Level
Output Level (max.)
Output Impedance
Sync Output Level
Connector Type
Compatibility
AMX reserves the right to modify its products and their specifications without notice.
66
Conditions
±3 dB to 300 MHz or better
f = 150 MHz <-30 dB
f = 30 MHz <-35 dB
f = 5 MHz <-50 dB
Vin = 0.7 V, 100 IRE >60 dB
±1.5 V
75 ohms
f = 5 MHz <-45 dB
TTL
±1.5 V
75 ohms
TTL
HD-15
Conditions
+0.75 V to -0.3 V
75 ohms
1600x1200(4:3) and 1920x1080p(16:9)
@ 60Hz up to 1000 ft. (305 m) (Cat5)
f = 150 MHz <-30 dB
f = 30 MHz <-35 dB
f = 5 MHz <-50 dB
Vin = 0.7 V, 100 IRE >60 dB
f = 5 MHz <-45 dB
TTL
+0.75 V to -0.3 V
75 ohms
TTL
HD-15
These boards can be used to break into and out of
the CatPro RGBHV+Stereo boards
Value
Value
Modula Instruction Manual