AMX Modula Instruction Manual page 104

Stereo Audio Boards
Specifications Table 4
Applies to CatPro-compatible stereo audio contained in the CatPro RGBHV/HD-15 system listed in
Applicability Table 4 (page 95).
Also applies to these CatPro-compatible stereo audio boards when contained in pre-engineered systems.
Specifications Table 4
Frequency Response
THD+Noise
Crosstalk
Signal to Noise Ratio
Input Level (max.), balanced
Input Impedance
Input Gain Adjustment Range
Output Level (max.), balanced
Output Impedance
Output Volume Adjustment Range
Type
Connector Type
Compatibility
AMX reserves the right to modify its products and their specifications without notice.
98
Parameter
f = 20 Hz to 20 kHz
f = 1 kHz, Vin = -10 to +4 dBu
f = 1 kHz, Vin = +4 dBu
f = 20 Hz to 20 kHz, Vin = +4 dBu >80 dB
Potentiometer adjustment
Via serial / control panel
Conditions
<±0.25 dB
<0.06%
<-95 dB
+8 dBu
18 kohms
+6 dB to -6 dB
+8 dBu
50 ohms
+10 dBu to -70 dBu (muted)
Balanced or unbalanced
Pluggable 5-position
terminal block
These boards can be used to break
into and out of the CatPro RGBHV
boards.
Value
Modula Instruction Manual