Sd-Sdi And Hd-Sdi Digital Video Board Specifications - AMX Modula Instruction Manual

SD-SDI and HD-SDI Digital Video Boards

SD-SDI and HD-SDI Digital Video Board Specifications

Specifications Table 1
Applies to SD-SDI digital video boards FG1034-410 and FG1034-413 contained in the enclosures listed
on page 119.
Also applies to these SD-SDI digital video boards when contained in pre-engineered systems.
Specifications Table 1
Parameter
Bit Rates
Auto Data Rate Lock
Data Type
Standards
Input Level (max.)
Input Impedance
Output Level (max.)
Output Impedance
Timing Jitter
Alignment Jitter
Rise and Fall Time
Auto Cable Equalization
CDR (Reclocking)
Connector Type
* Data not available for bit rates of 177 Mbps and 540 Mbps.
Specifications Table 2
Applies to HD-SDI digital video boards FG1034-533 and FG1034-536 contained in the enclosures listed
on page 119.
Also applies to these HD-SDI digital video boards when contained in pre-engineered systems.
Specifications Table 2
Parameter
Bit Rates
Auto Data Rate Lock
Data Type
Standards
Input Level (max.)
Input Impedance
Output Level (max.)
Output Impedance
Timing Jitter
Alignment Jitter
Auto Cable Equalization
CDR (Reclocking)
Connector Type
* Data not available for bit rates of 177 Mbps and 540 Mbps.
AMX reserves the right to modify its products and their specifications without notice.
120
143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps*
Yes
8 bit or 10 bit
SMPTE-259M, SMPTE-344M
0.8 Vpp, ±10%
75 ohms
0.8 Vpp, ±10%
75 ohms
<0.1 UI @ 360 Mbps
<0.1 UI @ 360 Mbps
600 ps, ±100 ps
Up to 350 m (1148.29 ft.) of Belden 8281 or equivalent @ 270 Mbps
Yes
BNC
143 Mbps, 177 Mbps*, 270 Mbps, 360 Mbps, 540 Mbps*, 1.485 Gbps
Yes
8 bit or 10 bit
SMPTE-259M, SMPTE-292M, SMPTE-344M
0.8 Vpp, ±10%
75 ohms
0.8 Vpp, ±10%
75 ohms
<0.2 UI @ 1.485 Gbps
<0.1 UI @ 1.485 Gbps
Up to 140 m (459.32 ft.) of Belden 1694A or equivalent @ 1.485 Gbps
Yes
BNC
Value
Value
Modula Instruction Manual