Catpro Rgbhv+Stereo Rx And Tx Modules Specifications - AMX Modula Instruction Manual

Distribution matrix
Hide thumbs Also See for Modula:
Table of Contents

Advertisement

RGBHV+Stereo to CatPro Boards with TXs & RXs
RGBHV+Stereo to CatPro Boards Specifications (continued)
Audio Specifications
Audio In/Out Signal Type
Audio In/Out Signal Level (max.)
Audio Frequency Response
Audio THD+Noise
Audio Crosstalk
Audio Signal to Noise Ratio
Audio In Impedance
Audio Output Impedance
Audio Out Volume Adjustment Range User adjustable at CatPro RX Module
Supported Twisted-Pair Cable Types
RGBHV+Stereo Connector Options
Note: Skew-free cable is not recommended for use with AMX AutoPatch equipment.

CatPro RGBHV+Stereo RX and TX Modules Specifications

Applies to TX Module FG1010-45-01 and RX Module FG1010-48-01 when used in conjunction with
RGBHV+Stereo to CatPro boards.
General Specifications
Approvals
Signal Types
Maximum Resolution
Supported Twisted-Pair Cable
Types
Power Consumption (max.)
Power Connector
Thermal Dissipation (max.)
Humidity
Operational Temperature
Dimensions – TX Module
Weight – TX Module
Dimensions – RX Module
Weight – RX Module
* When used with an AMX AutoPatch Distribution Matrix, overall cable length cannot exceed 1,000 ft. (305 m).
Note: Skew-free cable is not recommended for use with AMX AutoPatch equipment.
72
Parameter
f = 20 Hz to 20 kHz,
f = 1 kHz, Vin = -10 dBu to +4 dBu
f = 1 kHz, Vin = +4 dBu
f = 20 Hz to 20 KHz, Vin = +4 dBu
CE, UL, cUL
RGBHV+stereo audio, unbalanced
1600x1200 (4:3) and 1920x1080p (16:9) @ 60 Hz up to 1000 ft. (305 m)*
Cat5, Cat5e, Cat6, Cat6e, STP
+12 V to +24 V @ 1.3 A
2.1 mm DC power jack. Modules use power supplies that are provided
with each unit.
20 BTU/hr.
0 to 90% non-condensing
32º to 110º F (0º to 43º C)
5.15 in. (13.08 cm) depth
5.80 in. (14.73 cm) width
1.66 in. (4.22 cm) height
Approximately 1.5 lb. (0.68 kg)
5.15 in. (13.08 cm) depth
4.33 in. (11.0 cm) width
1.66 in. (4.22 cm) height
Approximately 1.3 lb. (0.6 kg)
Conditions
Stereo, unbalanced
+8 dBu
<±0.2 dB
<0.04%
<-98 dB
>83 dB
2 kohms
<5 ohms
+6 dB to mute
Cat5, Cat5e, Cat6, Cat6e,
STP (skew-free cable is not
recommended)
Female RJ-45
Value
Modula Instruction Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autopatch modula

Table of Contents