Navigating The Interface - AMX Modula Instruction Manual

Navigating the Interface

XNConnect displays configuration information in two panes. The graphics are located in the left pane,
and the properties of the currently selected graphic are in the right pane. At the top of the left pane are
two tabs, Hardware and Virtual Matrices, for accessing the Hardware and Virtual Matrix views
(see below). To see the details and components of a device or a virtual matrix, click the plus "+" symbol
to the left of the device or the virtual matrix.
Most configuration file modifications involve entering information in a series of dialog boxes that are
accessed by right-clicking a hardware device or virtual matrix icon and selecting an option from the
shortcut menu.
Tip: If you have a question regarding an open dialog box, press the F1 key for Help.
Hardware View
The Hardware view displays the system's hardware, such as enclosures and serial ports.
Virtual Matrix View
The Virtual Matrix view displays properties of the existing virtual matrices. Most common tasks are
conducted from this view, including customizing channel names and creating local presets.
Hardware tab
Primary
device
Communication settings
FIG. 102
The XNConnect interface showing the Hardware view
Modula Instruction Manual
Virtual Matrices tab
Components of the
primary device
View of all linked
AMX AutoPatch devices
Appendix A – Managing Configuration Files
Highlighted device
Device firmware version
Properties of highlighted device
151