S-Video Boards Specifications - AMX Modula Instruction Manual

S-Video Boards Specifications

Specifications Table 1
Applies to S-Video boards listed in Applicability Tables 1A and 1B (see page 59).
Also applies to these S-Video boards when contained in pre-engineered systems.
Specifications Table 1
Frequency Response
Crosstalk
Differential Gain
Differential Phase
Signal to Noise Ratio (SNR)
Input Level (max.)
Input Impedance
Output Level
Output Impedance
Connector Type
Specifications Table 2
Applies to Cat5 compatible S-Video boards contained in Cat5 Video / Audio enclosures listed in
Applicability Table 2 (see page 60).
Also applies to these S-Video boards when contained in pre-engineered systems.
Specifications Table 2
Frequency Response
Crosstalk
Differential Gain
Differential Phase
Signal to Noise Ratio (SNR)
Input Level (max.)
Input Impedance
Output Level (max.)
Output Impedance
Connector Type
Modula Instruction Manual
Parameter
1 to All
f = 5 MHz
f = 3.58 MHz
f = 3.58 MHz
Vin = 0.7 V, 100 IRE
Parameter
Using Cat5, Cat5e, or Cat6 cable:
Up to 3 ft. (0.9 m)
Up to 300 ft. (91.4 m)
Up to 1000 ft. (304.8 m)
f = 5 MHz
f = 3.58 MHz, 10 to 90% APL
f = 3.58 MHz, 10 to 90% APL
Vin = 0.7 V, 100 IRE
Conditions
±3 dB to 50 MHz or better
±1 dB to 20 MHz or better
<-50 dB
<0.2% or better
<0.2º or better
>65 dB
±2 V
75 ohms
±2 V
75 ohms
S-Video (4 Pin Mini-Din),
Locking S-Video
Conditions
±3 dB to 35 MHz or better
±3 dB to 15 MHz or better
±3 dB to 10 MHz or better
<50 dB
<0.2% or better
<1º or better
>65 dB
±1 V
75 ohms
±1 V
75 ohms
S-Video (4 Pin Mini-Din),
Locking S-Video
S-Video Boards
Value
Value
61