AMX Modula Instruction Manual page 108

Stereo Audio Boards
Potentiometer Input Boards
To adjust potentiometer input gain:
1.
Route a source (input) to the first destination (output).
FIG. 65
Input gain adjustment pots
2.
Adjust the input gain for the source to the desired dB level by turning the corresponding
potentiometer (FIG. 65) clockwise (to the right) to decrease gain or counterclockwise (to the left)
to increase gain.
102
Input 1, Left Stereo Channel
Input 1, Right Stereo Channel
Input 2, Left Stereo Channel
Input 2, Right Stereo Channel
Modula Instruction Manual