Board Settings
The microphone input board has two setting options:
To increase microphone sensitivity:
1.
Turn the microphone sensitivity adjustment to the left (counterclockwise).
FIG. 75
Setting options
To select phantom power for microphones (if microphone power board is installed):
1.
Set the phantom power selection switch to "+48 V" (flip up).
Modula Instruction Manual
Microphone sensitivity adjustment
Selection of phantom power for microphones (works only if a microphone power board is
installed).
Microphone sensitivity adjustment
Turn left (counterclockwise) to increase sensitivity
Phantom power selection switch
Set to "+48V" to select phantom power
Set to "OFF" before attaching wires or setting compression ratio
Microphone Input and Phantom Power Boards
117