Epica Dgx 32 Sc Optical Boards - AMX Epica DGX 32 Instruction Manual

Epica DGX 32 SC Optical Boards

Applicability Notice
This chapter pertains to the following Epica DGX 32 SC Optical Boards:
Epica DGX 32 SC Optical Boards
FIG. 25
Epica DGX 32 enclosures are built to hold up to sixteen DGX SC Optical Boards with four inputs or
outputs per board.
Each enclosure holds a maximum of eight input and eight output boards, accommodating connector
configurations up to a maximum of 32x32, as well as subsets (for example, 12x24 or 32x8).
DGX SC Optical Input Boards route signals to DGX SC Optical Output Boards or to any other type of
Epica DGX 32 Output Boards. DGX SC Optical Output Boards accept signals from all types of
Epica DGX 32 Boards. When routing signals between different board types, the Epica DGX 32
automatically converts the signal format to match the output board.
Currently, the following signals can be sent over DGX SC Optical Boards: DVI-D, analog video, and
digital or analog stereo audio. Supported analog video signals include RGBHV, RGBS, RGsB, and
Y/Pb/Pr.
DGX SC Optical Boards must be used in conjunction with DGX Fiber modules (see the compatibility
list on page 46 and the system setup information on page 47).
Epica DGX 32 Instruction Manual
FG1056-500 Input board
FG1056-510 Output board
Epica DGX 32 SC Optical Boards
45