Unpacking - AMX Modula Instruction Manual

Installation and Setup
Circuit Overloading
When connecting the equipment to the supply circuits, be aware of the effect that overloading the
circuits might have on over-current protection and supply wiring.
Reliable Earthing (Grounding)
Reliable earthing of rack-mounted equipment should be maintained. If not using a direct connection
to the branch circuit (e.g., plugging into a power strip), pay particular attention to supply connections.
Caution: For proper start up, turn on all power switches for the AMX AutoPatch equipment at the
same time before applying power to the source and destination devices. We recommend attaching
all power cords to a surge protector and/or an AC line conditioner.

Unpacking

The Modula is shipped with one enclosure per shipping box. The invoice is sent separately; a packing
slip is attached to the outside of each box. Each box contains the following items:
The documentation in the first box includes:
For orders comprising multiple enclosures, the shipping boxes are marked as "Chassis __ of __," where
the first blank is the box number and the second blank is the total number of boxes in the shipment.
Important: If applicable, the shipping boxes each have a yellow/green sticker that states that the
unit (enclosure) is part of a multiple-enclosure system and must be installed with the same serial
numbers.
Unpacking Tips
Note: Please save the original shipping container and packing materials. AMX is not responsible for
damage caused by insufficient packing during return shipment to the factory. Shipping boxes are
available; contact your AMX representative for details.
22
Enclosure
Standard US power cord (if shipped within the US)
Rack ears (with 8 screws per set)
Link cables and T-connectors (provided with multiple-enclosure systems)
50-ohm termination connector(s)
Other enclosure products as needed
AMX AutoPatch Modula Quick Start Guide
AMX AutoPatch Linking Enclosures Quick Start Guide (for multiple-enclosure systems)
AMX AutoPatch CD
AutoPatch Modula Connector Guide
Before fully unpacking the enclosure(s), inspect the shipping box(es) for any signs of damage.
If a box is partially crushed or any sides have been broken open, notify the shipping agency
immediately and contact your AMX representative (see the warranty on the
AMX AutoPatch CD or at www.amx.com).
Once unpacking is complete, closely check the physical condition of the enclosure.
Collect all documentation.
Modula Instruction Manual