Cat5 S-Video+Stereo Txs And Rxs Modules Specifications - AMX Modula Instruction Manual

Cat5 Video and Audio Boards with TXs & RXs
Cat5 Video and Audio Boards Specifications (continued)
Audio Specifications
Parameter
Frequency Response
THD + Noise, balanced
THD + Noise, unbalanced f = 20 Hz to 20 kHz, Vin = -10 dBu to +8 dBu
Crosstalk, balanced
Crosstalk, unbalanced
Signal to Noise Ratio,
balanced
Signal to Noise Ratio,
unbalanced
Input Level (max.),
balanced
Input Level (max.),
unbalanced
Input Impedance
Output Level (max.),
balanced
Output Level (max.)
unbalanced
Output Impedance
Signal Type
Connector Options

Cat5 S-Video+Stereo TXs and RXs Modules Specifications

Applies to the TX and RX modules in FIG. 80 and the TX and RX AF-10 boards listed in the chart on
page 125 when used in conjunction with Cat5 Video and Audio boards
General Specifications
Approvals
Signal Types
Supported Twisted-Pair Cable Types
Power Consumption (max.) – Modules
Power – AF-10
Power Connector – Modules
Humidity
Operational Temperature
Dimensions
Weight
Connector Options
126
Conditions
f = 20 Hz to 20 kHz
f = 20 Hz to 20 kHz, Vin = -10 dBu to +22 dBu <0.04%
f = 1 kHz, Vin = +20 dBu
f = 1 kHz, Vin = +2 dBu
f = 20 Hz to 20 kHz, Vin = +20 dBu
f = 20 Hz to 20 kHz, Vin = +4 dBu
CE, UL, cUL
S-Video (or composite on one BNC or RCA) and stereo audio
Cat5, Cat5e, Cat6
+12 VDC to +24 VDC @ 1.3A
120 VAC / 240 VAC
2.1 mm DC power jack.
AMX AutoPatch power supply provided with the unit
0 to 90% non-condensing
32º to 110º F (0º to 43º C)
5.15 in. (13.08 cm) depth
4.33 in. (11.00 cm) width
1.66 in. (4.22 cm) height
Approximately 1.5 lb. (0.68 kg)
RJ-45, BNC, RCA, S-Video, 3-position terminal block
Value
<± 0.2 dB
<0.03%
<-90 dB
<-85 dB
>110 dB
>90 dB
+22 dBu
+8 dBu
18 kohms
+22 dBu
+8 dBu
50 ohms
Will route stereo or mono audio
RJ-45
.
Modula Instruction Manual