AMX Modula Instruction Manual page 81

To attach CatPro (RJ-45) inputs and outputs:
1.
Insert the RJ-45 cable connectors into the input and output RJ-45 receptacles (FIG. 37).
FIG. 37
Insert RJ-45 connector into RJ-45 receptacle
To attach input, outputs, and power to the TX Module:
1.
Insert the audio mini-jack (3.5 mm) into the Audio Input connector (FIG. 38).
FIG. 38
Attach source device connectors, RJ-45 connector and power to TX
2.
Fasten the HD-15 cable to the Video Input connector.
3.
Insert the RJ-45 connector into the Cat5 receptacle.
4.
If using the AMX AutoPatch power supply provided – Plug the desktop power supply into the
power jack on the module and into an AC external power source.
Or
If you are providing the power supply – Plug the power cord from a UL (or equivalent) listed power
supply into the power jack on the module. The electrical ratings must meet those indicated in the
specifications table (see page 72).
5.
Optional – To use the Local Out option, insert the audio mini-jack and the HD-15 connector into the
Local Output connectors.
Modula Instruction Manual
HD-15
Power
Audio
RGBHV+Stereo to CatPro Boards with TXs & RXs
RJ-45
75