Cat5 Video And Audio Boards With Txs & Rxs; Applicability Notice - AMX Modula Instruction Manual

Cat5 Video and Audio Boards with TXs & RXs

Applicability Notice

FIG. 79
Cat5 boards
This chapter pertains to Modula Cat5 (Category 5) input and output boards contained in
pre-engineered systems and custom systems. The table below provides information on the types of
Modula Cat5 boards and their numbers and indicates which enclosure models can hold which boards.
Modula Cat5 boards must be used in conjunction with Cat5 S-Video+Stereo Transmitters (TX)
and/or Receivers (RX) to make up a complete system. Cat5 TXs and RXs are available either as modules
or as AF-10 boards. For information on system setup, see page 128.
Modula Cat5 Video and Audio Boards in Cat5 Video and Audio Enclosures
Cat5 Video and Audio Boards and Numbers
Note: Specifications for these boards are listed on page 125. Cat5 / Video and Audio (32x32)
Input
FG1034-488
Output
FG1034-494
Modula Instruction Manual
Cat5 Video and Audio Boards with TXs & RXs
Enclosure Types and Numbers
FG1034-37
Cat5 / Video and Audio (16x48 Flex-slot)
FG1034-22
Cat5 / Video and Audio (48x16 Flex-slot)
FG1034-52
123