AMX Modula Instruction Manual page 14

Overview and General Specifications
Modula Control Features
Modula systems support three different protocols: BCS* (Basic Control Structure), XNNet, and TCP/IP.
Several different control options are available for Modula systems. Multiple control methods can be used
on the same system.
* BCS is sent as ASCII characters through the serial port. For information on BCS commands, see the
Instruction Manual – BCS Basic Control Structure Protocol on the AMX AutoPatch CD or at
www.amx.com.
Note: Features and specifications described in this document are subject to change without notice.
8
Choice of front mounted CP-10 or CP-20A control panel – or blank front panel
Remote control panel options
AMX control devices (for control programming information, see the instruction manual for
the specific interface)
APControl 3.0 software (free with all systems)
APWeb (TCP/IP control via an external module)
Supports AMX AutoPatch's simple BCS serial control protocol
Supports third-party controllers
Modula Instruction Manual