Installing Xnconnect - AMX Modula Instruction Manual

Appendix A – Managing Configuration Files

Installing XNConnect

Use this software only if you need to customize or change the configuration information from the
original specification.
Even if XNConnect is already on your PC, install the newest version that shipped on the same CD as the
.xcl configuration file. We strongly recommend uninstalling the old version of XNConnect before
installing a new version.
System Requirements
To install XNConnect from the AMX AutoPatch CD:
1.
Close all other applications currently running on your PC.
2.
Insert the AMX AutoPatch CD into your CD drive to start automatically.
If the CD does not autorun, explore the CD folder and double-click the Index.html file.
3.
Select Software and find XNConnect.
4.
Optional – Select Release Notes to read about the software before installation.
5. Select Install.
6.
Follow the directions in the subsequent dialog boxes.
Note: If your AMX account has the required permissions, you can download the newest version of
XNConnect from www.amx.com. An INI file Updater for updating XNConnect is available on the
AMX website under AutoPatch tools (an account is not required).
148
®
Windows XP Professional
233 MHz processor
Minimum of 128 MB of RAM
20 MB of available hard drive space
800x600 screen resolution (1024x768 is recommended)
Serial port and RS-232 null modem cable
Modula Instruction Manual