AMX Modula Instruction Manual page 79

CatPro RGBHV+Stereo RX and TX Modules Specifications (continued)
Specifications – TX Module (FG1010-45-01)
Parameter
RGB In
Signal Level Range:
Impedance:
Return Loss:
RGB Local Out
Signal Level Range:
Impedance:
Signal to Noise Ratio:
Sync In
Impedance:
Polarity:
Sync Local Out
Signal Level:
Polarity:
Audio In
Signal Level (max.):
Impedance:
Audio Local Out
Signal Level (max.):
Frequency Response:
THD+Noise:
Signal to Nose Ratio:
Impedance:
Connector Options
RGBHV In:
RGBHV Local Out:
Stereo Audio In:
Stereo Audio Local Out:
RGBHV+Stereo Out:
Modula Instruction Manual
RGBHV+Stereo to CatPro Boards with TXs & RXs
Conditions
Terminated
f = 5 MHz
Terminated
Unterminated
Follows input polarity
f = 20 Hz to 20 kHz
f = 1 kHz, Vin = -10 dBu to +4 dBu
f = 20 Hz to 20 kHz, Vin = +4 dBu
Value
+0.75 V to -0.3 V
75 ohms
<-35 dB
+0.75 V to -0.3 V
75 ohms
>65 dB
510 ohms
Active high or low
Low = 0 V, High = +5 V
Active high or low
+8 dBu
2 kohms
+8 dBu (unity gain)
<±0.35 dB
<0.04%
>105 dB
<5 ohm
1 Female HD-15
1 Female HD-15
1 Female 3.5 mm mini-stereo jack
1 Female 3.5 mm mini-stereo jack
1 Female RJ-45
73