AMX Modula Instruction Manual page 18

Overview and General Specifications
Power Receptacle with Specifications
The universal power receptacle is in the lower left hand corner on the rear of the enclosure (FIG. 4).
Maximum power specifications are on the power receptacle. The power receptacle will accept all major
international standard power sources. (Standard US power cords are provided for installations within the
US.) This unit contains a fuse, a power switch, and the power receptacle. The fuse is internal and is not
field serviceable. If you believe the fuse needs to be replaced, contact technical support (see page 43).
Press the "0" side of the power switch to turn it off; press the "l" side to turn it on.
Caution: Double Pole/Neutral Fusing fuses are used both in the "live" phase and the "neutral" phase
of the device.
System serial number labels (exact location may vary)
Power receptacle with specifications
FIG. 4
Left end of enclosure rear
System Serial Number
The system's serial number is normally located in two places on the enclosure. When viewed from the
rear, one serial number label is on the left expansion plate (FIG. 4). The second serial number label is on
the left side of the enclosure at the bottom edge (near the power receptacle). The label on the side will
also have the enclosure number (referred to as the chassis number). A single enclosure will be labeled
"Chassis 1 of 1"; in a multiple-enclosure system the enclosures will be labeled "Chassis 1 of 3", etc.
Before installation, we recommend recording the serial number for each enclosure in the system in an
easily accessible location.
12 Modula Instruction Manual