Locking And Unlocking - AMX Enova DGX 8 Instruction Manual

Control Panel Operation
2.
Locate Local Preset by scrolling with the Control Dial.
3. Press the Select Key.
The Local Preset list appears.
4. Scroll to Local Preset 3.
5.
Press either the Select Key or the Take Key.
Local Preset 3 is executed.
6.
Execute another local preset.
Or
Press the Function Key to return to the Function menu.

Locking and Unlocking

Locking the Enova DGX Control Panel prohibits access to the system and can prevent accidental
switching. While the panel is locked, BCS commands still work; however, they cannot be used to unlock
the panel. The panel remains locked if the power is cycled.
The password used to lock and unlock the panel consists of a sequence of five input keys. The factory
default password is the first five Input Keys (1-2-3-4-5). A new password can be set using any
combination of five keys from Input 1 through Input 8 (for instructions, see page 126).
Caution: We strongly recommend recording passwords in a secure place; Enova DGX Switchers
cannot retrieve a lost password.
If the password is lost while the system is locked, contact technical support (see page 62).
Locking the Control Panel
If you enter the wrong password while attempting to lock the Control Panel, the LCD displays "Invalid
Password" and the Cancel Key flashes. Press the Cancel Key to clear the error and enter the correct
password.
Note: For security purposes, the Input Keys do not turn white when pressed while locking and
unlocking the panel.
122 Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers