AMX Enova DGX 8 Instruction Manual page 15

HDMI, DVI, DXLink™, and Audio (continued)




Digital Media Switcher






Control Ports





Additional Features Available with Epica DGX SC Optical Boards




Product Support


Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Custom EDID settings can be loaded on each DVI and HDMI input with DGX Configuration
Software (available at www.amx.com).
®
InstaGate Pro Technology – Easily integrate HDCP into system designs and enjoy hassle-
free matrix switching to all compliant displays. No tools, no delays, and no key constraints
– it just works.
DXLink™ Twisted Pair Boards provide transport over twisted pair cable.
The Audio Insert/Extract (expansion) Board can be set to insert/extract audio into/out of video
input or output boards.
The available input/output range is 4x4 to 8x8 for the Enova DGX 8, 4x4 to 16x16 for the
Enova DGX 16, and 4x4 to 32x32 for the Enova DGX 32 (all come in increments of 4 with
upgrade potential to the individual product's capacity).
System self-diagnostics – power monitoring, fan control and monitoring, signal and
temperature sensing. Ships with APDiagnostics software – monitors, displays, and collects
advanced diagnostic information.
Local presets allow quick recall of a pre-programmed set of switches with a single command;
multiple presets can exist within a system at the same time.
Global presets allow quick recall of a comprehensive snapshot of all switches.
Fully redundant (hot-swappable) power supplies (RPS) with independent power paths for
maximum reliability.
Rack mounting ears integral to product design.
®
Integrated NetLinx Master is an NI-3100 Class Controller.
LAN 100/1000 port, the network connection for the integrated Master.
Program port (USB mini-AB) used for initial setup with NetLinx Studio.
Control port (standard RS-232) for direct matrix switching control.
Control port (USB mini-B) used as a virtual COM port for serial communication with a PC.
Designed for use with single strand multimode fiber.
Use in conjunction with DGX Fiber Transmitters and Receivers to send video and audio over
a single fiber cable up to a total of 6000 feet (1828.8 m), i.e., 3000 feet (914.4 m) from the
source to the Enova DGX enclosure and 3000 feet from the Enova DGX enclosure to the
destination.
DGX SC Optical Boards support DVI (non-HDCP) and HDMI (non-HDCP) formats. They
also support RGBHV, RGBS, RGsB, and Y/Pb/Pr (Y/Pb/Pr including 1080p) video,
depending on the type of DGX Fiber Modules used with them.
DGX SC Optical Boards support embedded analog stereo audio signals (unbalanced stereo
@ a sample rate of 48 kHz) and digital audio signals (PCM over S/PDIF @ 32 kHz, 44.1 kHz,
48 kHz, as well as 96 kHz, which requires a minimum video resolution of 800x600 @ 60 Hz).
AMX Limited Lifetime Warranty included (see www.amx.com).
24-hour technical support.
Product Overview and General Specifications
9