AMX Enova DGX 8 Instruction Manual page 23

Product Overview and General Specifications
If the expansion board slots in an enclosure are empty, the slots can be used for expansion boards to
expand the functionality of the system. The procedure for installing/replacing an Audio Insert/Extract
Board and setting it for insertion or extraction starts on page 105.
Caution: Standard input and output boards will not fit in the expansion slots.
Important: Setting the DIP switches is the only mechanism for configuring the Audio Insert/Extract
Board to either insert or extract audio. Therefore, setting the switches (which requires removal of the
board from the enclosure) needs to be done at the time of installation setup.
Serial Numbers
The serial numbers are normally located on the rear of the enclosure on the left (for the Enova DGX 8,
see FIG. 3 on page 11; for the Enova DGX 16, see FIG. 4 on page 12; and for the Enova DGX 32, see
FIG. 5 on page 12). Before installation, we recommend recording the serial number for the enclosure
(and for each module and/or wallplate if applicable) in an easily accessible location.
MAC Address
The MAC address for the system is located directly above the Control (DB-9 serial) port on the CPU.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers 17