AMX Enova DGX 8 Instruction Manual page 52

Installation and Setup
Note: If you are not using NetLinx Studio and/or are using a third-party controller, contact your Network
Administrator for the IP address.
To change the settings to communicate via the LAN 100/1000 port:
1.
From the Settings menu, select Master Communication Settings.
The Master Communication Settings dialog box opens.
2.
From the Available System(s) list on the left, select the system.
3.
Click Communications Settings.
The Communication Settings dialog box opens.
4.
Under Platform Selection, check to be sure NetLinx Master is selected (default).
5.
Under Transport Connection Option, select TCP/IP.
A List of Addresses section opens at the bottom of the dialog box. The list contains a series of
previously entered IP Addresses/URLsand their associated names, all of which are stored within
NetLinx Studio and are user-editable).
46
Enova DGX 16
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
TCP/IP