Using Passthrough Mode; Exiting Passthrough Mode; Locking One Or More Ports - AMX UDM-1604C Operation/Reference Manual

Using Passthrough Mode

Once a device has been configured for Passthrough Mode the relevant remote control is used to control
the device.
Press the previously configured key on the relevant remote control (UDM-RX01 or Sky remote control)
to enter passthrough mode.

Exiting Passthrough Mode

Press any key on the UDM-RC02 remote which is not configured as a control enabled key.
If accessing a Tivo or Sky set-top box press TV on the Tivo or Sky remote.

Locking One or More Ports

Locking an output port to a specific source prevents any user control at that port.
1. On the Status page, select the Locked checkbox beside the relevant port or ports (FIG. 41).
FIG. 41 Locking a port
2. Click on Execute. The port is now locked to that display.
Multiple ports can be locked by clicking on the Include checkbox relevant to the port,
then clicking on Execute to lock the ports.
UDM-1604C 4x16 Multi-Format Distribution Hub
If accessing a Sky Box through passthrough, click on the Sky button on the Sky remote
control. Now use the Sky Remote control as normal. (Press TV on the Sky remote to exit
passthrough mode).
If accessing a DVD player through passthrough, click on the relevant button on the DVD
remote control to play, pause, stop eject etc. Use the DVD Remote control as normal.
If accessing an Endeleo TVM Hub through passthrough, click on the Up or Down channel on
the TVM remote control, to toggle between channels.
Configuration - Status Page
43