Dual Output; Locking One Or More Ports - AMX Endeleo UDM-1604 Operation/Reference Manual

Operating the UDM Hub

Dual Output

"Dual output" permits a single input to be viewed as 2 separate output types. For example a port could be
configured for the Dual Output of VGA and Component video. This means at the RX end the input could
be delivered to two separate display devices over the relevant connections at the RX.
To place a port into Dual Output mode;
1. Click on the Status screen.
2. Click on the relevant port hyperlink.
3. Click on the Dual Output checkbox to permit the port to display the single input as 2 separate types
at the RX (FIG. 51).
FIG. 51 Enabling Dual Output
Ensure the correct cabling is in place at the RX to accommodate the 2 separate
signals.

Locking One or More Ports

Locking a port(s) will prevent any user interaction at that port(s).
1. Click on the Status option.
2. To lock any or all output ports to a specific source thus preventing any user control simply select the
Locked check box beside the relevant port(s) (FIG. 52).
FIG. 52 Locking a port
3. Once selected click on the Execute button at the top of the screen. The port is now locked to that
display.
Multiple ports can be locked by clicking on the Include check box relevant to the port,
then clicking on Execute to lock the ports.
42 UDM-1604 Endeleo Multi-Format Distribution Hub