AMX Enova DGX 8 Instruction Manual page 201

Application Preferences
To access the Application Preferences dialog box and set preferences:
1.
Select Options > Preferences.
The Preferences dialog box has two tabs: General and Logging.
General Tab
To set general application preferences:
1.
For the upper set of preferences, click the applicable Enabled check boxes.





2.
For the lower set of preferences, edit information in place (Help boxes appear).


3. Click OK.
* If this preference is "off," the program will use the last XNNet ID stored in its registry (and expects
that enclosure to be present).
When processing a set of archived files in Emulation mode for analysis, you can control how fast or slow
the files are processed by adjusting the "Emulation Mode Packet Interval" setting on the General tab of
the Application Preferences dialog box. If you are viewing graphs while the data is being processed,
specifying a larger interval value will allow the program to be more responsive as the Plot Views can be
processor intensive in the face of fast playbacks.
Important: APDiagnostics keeps a cache of historical data points in memory for status of all
components that it monitors. These data points can then be displayed in the Plot Views for trend
analysis. You can control the amount of system memory APDiagnostics will use for this historical
data by setting the "Cached Probe History" value on the General tab. (The Max. Cached Probe
History is 168 hours. For default values, see the dialog box.) Large history sets may impede
performance of the application, so set this value in accordance with the resources available on the
target PC.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Always Perform Live Network Discover* (selected by default)
Open Activity Viewer at Startup
Use Last Comm-Link at Startup (selected by default)
Show Mode-Selection Dialog at Startup (selected by default)
Auto-Connect in Acquisition mode (selected by default)
Emulation Mode Packet Interval
Cached Probe History
Appendix C – APDiagnostics
Click to enable
Edit in place
195