Enova DGX – NetLinx and Control Specifications
NetLinx and Control Specifications
Integrated Controller
LAN/ Ethernet Port
Processor
Memory
Program Port (USB)
Enclosure Control
Control Port (Serial)
Control Port (USB)
* Cascaded architecture actual throughput dependent on loading. Worst case per port throughput is 10 Mbps;
best case is 100 Mbps when used with a total of 32 DXLink TXs and 32 DXLink RXs for an Enova DGX 32,
16 DXLink TXs and 16 DXLink RXs for an Enova DGX 16, and 8 DXLink TXs and 8 DXLink RXs for an
Enova DGX 8.
For individual board information and specifications, see the specific board chapter in this manual.
AMX reserves the right to modify its products and their specifications without notice.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
NetLinx on-board Master is an NI-3100 Class Controller
• TCP/IP uplink port (LAN 10/100/1000)
• Supports up to 64-port un-managed 10/100 Ethernet Switch*
• Static IP or DHCP/DNS, SSL, Auto-negotiating, Half/Full Duplex, Auto
MDI/MDI-X Crossover
• TCP/IP, UDP/IP, CIP, SMTP, Built-in Web server
• Includes support for DXLink™ devices
• RJ-45 connector
CPU 404 MIPS PowerPC
• SDRAM 256 MB
• NVRAM 1 MB
• Flash 2 GB
USB Mini-AB connector (used for NetLinx Studio control)
Bidirectional RS-232
• Baud rates of 9600 (default), 19200, 38400, 57600
• DB-9 connector
USB Mini-B connector
HDMI Input and Output Boards – see page 63
DVI Input and Output Boards – see page 73
DXLink Twisted Pair Input and Output Boards – see page 79
SC Optical Input and Output Boards – see page 95
Audio Insert/Extract (expansion) Board – see page 101
Product Overview and General Specifications
21