Opening The Netlinx Webconsole - AMX Enova DGX 8 Instruction Manual

NetLinx® Integrated Control
The WebConsole & Programming Guide – NetLinx Integrated Controllers at www.amx.com provides
information on the following:











Caution: We strongly recommend a Network Administrator set up the system even if DHCP
(Dynamic Host Configuration Protocol), gateways, firewalls, etc. are not being used.

Opening the NetLinx WebConsole

Caution: We strongly recommend that the NetLinx WebConsole interface site be placed inside your
network firewall and that system security be turned on.
To open the NetLinx WebConsole interface:
1.
From the NetLinx Studio Zero-Config tab
or right-click and select one of the launch browser options. (If the "Enova DGX [8, 16, or 32]"
option is not displayed, see the instructions on page 45.)
The Manage WebControl Connections page opens.
Or
In the address bar of your PC's browser
IP address, see the instructions on page 45 or contact your Network Administrator).
The PC must be on the same subnet (e.g., 192.168.X.X).
The Manage WebControl Connections page opens.
FIG. 69
The Manage WebControl Connections page (default page)
132
D:P:S specification
Navigation of the WebConsole user interface
Basic configuration of the system
Firmware upgrades
Options on the WebConsole pages for the System, Master, and devices
NetLinx programming
NetLinx security options
SSL Certificate information for the system
Terminal commands for the Program port and Telnet
IPSec Configuration file
Clock Manager NetLinx Programming API
– Double-click on "Enova DGX [8, 16, or 32]"
– Type the IP address and press Enter (to determine the
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers