Integrated Master – NetLinx® Programming
SEND_COMMANDs – Diagnostic and Auxiliary BCS Commands (continued)
~app!
Auxiliary – Causes a warm
reboot of the system.
Additional BCS Commands
SEND_COMMANDs for switching control of the Enova DGX Switcher are not limited to the ones in
the first table but can include additional "wrapped" BCS commands as well (e.g., disconnect switches,
execute local presets, and define and execute global presets).
For complete information on BCS commands supported by Enova DGX Switchers, see the
product specific information in the Instruction Manual – BCS Basic Control Structure Protocol at
www.amx.com.
156
Syntax:
SEND_COMMAND <Device:Port:System>,"'~app!'"
Note: The "Device" number is assigned by the integrated NetLinx Master.
Example:
SEND_COMMAND 5002:3:0,"'~app!'"
Causes a warm reboot of the system.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers