AMX Enova DGX 8 Instruction Manual page 21

Enova DGX 16
FIG. 9
DGX HDMI, DXLink, DVI, and DGX SC Optical Input and Output Boards
Enova DGX 16 enclosures have 8 horizontal I/O board slots (4 slots each for input and output boards
with four connectors each), allowing for a maximum configuration of 16x16.
Enova DGX 32
FIG. 10
HDMI, DXLink, DVI, and SC Optical Input and Output Boards
Enova DGX 32 enclosures have 16 vertical I/O board slots (8 slots each for input and output boards with
four connectors each), allowing for a maximum configuration of 32x32.
For information on the boards included in your system, including connector types, cabling directions,
installation considerations, and specifications, see the specific board chapter in this manual.




If a system has empty input or output board slots (which are numbered for additional inputs and outputs),
the slots can be used to expand the system. For information on adding or replacing boards, see
"Appendix E
Note: Audio Insert/Extract (expansion) Boards are also available. They provide audio insertion and
extraction functionality and are used in conjunction with HDMI, DVI, and DXLink Boards (see
"Expansion Boards" on page 16).
Input and Output Board Connectors
The connectors on the input and output boards are the attachment points for source and destination
devices that connect to the system. Viewed from the rear of the enclosure, the input connectors (for
attaching sources) are on the left, and the output connectors (for attaching destinations) are on the right.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
Numbering plate
Input boards
Input boards
HDMI Boards – see page 63
DVI Boards – see page 73
DXLink Twisted Pair Boards – see page 79
SC Optical Boards – see page 95
Adding or Replacing Boards" on page 205.
–
Product Overview and General Specifications
Output boards
Output boards
HDMI Board
DXLink Board
DVI Board
SC Optical Board
Numbering plate
HDMI Board
DXLink Board
DVI Board
SC Optical Board
15