AMX Enova DGX 8 Instruction Manual page 119

Control Panel Operation
Menus and Modes
The Function menu and its submenus access the modes and functions
used to control the system. The modes are Change, Virtual Matrix, Status,
Disconnect, Setup Options, Lock Panel, Global Preset, and Local Preset.
While in a mode, the same command can be repeated, without having to
return to the Function menu to re-select the mode, e.g., executing more
than one local preset.
Use the Control Dial and Select Key to navigate the Function menu, and
submenus. The Function menu and the submenus are loop menus, which
means that each menu returns to its first item after you scroll past its last
item.
Note: A clear label with white lettering that shows the entire LCD
Function menu (as shown on the right) is included in the Control Panel
Label Kit shipped with the system. Dust surface of panel near the LCD
Function menu structure
with a dry cloth (if necessary, use a non-abrasive cleaner), peel the
backing off of the label, and firmly press the label on the panel.
The Function menu (see right) and its submenus access the following modes and functions:
Change
Selecting Change places the system in Change Mode. The Control Panel must be in Change Mode to
execute switches. While in Change Mode, select the Input and Output(s) Keys followed by the Take Key
to execute switches (see page 115).
Virtual Matrix
Selecting the Virtual Matrix Mode accesses the virtual matrices designated for the system in the
configuration file (VM 0, VM 1, and any custom virtual matrices). The Virtual Matrix Mode can be
selected to change the virtual matrix currently used to execute operations (see page 116).
Status
Selecting Status places the system in Status Mode. Status Mode is used to confirm signal routing or
routing to multiple outputs without risk of accidentally executing a switch (see page 118).
Disconnect
Selecting Disconnect places the system in Disconnect Mode. While in Disconnect Mode, select the Input
or Output Key(s) followed by the Take Key to disconnect switches (see page 117). While in Disconnect
Mode, the Control Panel does not indicate the current routing of selected inputs or outputs.
Setup Options
Selecting Setup Options (see page 124) accesses the Setup Options submenu to check the software
version, change the default virtual matrix, reload the configuration file (when directed to do so by
technical support), and change the Control Panel password.
Lock Panel
Selecting Lock Panel places the Control Panel in Lock Mode at which time the password is entered to
lock the panel. Locking the panel prohibits access to the system and can prevent accidental switching
(see page 122).
Global Preset
Selecting Global Preset accesses the Global Preset submenu to execute global presets or define global
presets (see page 119).
Local Preset
Selecting Local Preset accesses the list of local presets that can be executed (see page 121). Local Preset
will only appear as an option on the Function menu if local presets have been defined in XNConnect
configuration software for the selected virtual matrix.
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers 113