Locking A Port(S) - AMX endeleo UDM 1604 User Manual

Section 5
Operating the UDM Hub
To place a port into Dual Output mode;
(1)
(2)
(3)
5.8

Locking a Port(s)

Locking a port(s) will prevent any user interaction at that port(s).
(1)
(2)
(3)
Click on the Status screen.
Click on the relevant port hyperlink.
Click on the Dual Output checkbox to permit the port
to display the single input as 2 separate types at the
RX.
Figure 5-11: Enabling Dual Output
Note;
Ensure the correct cabling is in place at the RX to
accommodate the 2 separate signals.
Click on the Status option.
To lock any or all output ports to a specific source thus
preventing any user control simply select the Locked
check box beside the relevant port(s).
Figure 5-12: Locking a port
Once selected click on the Execute button at the top of
the screen. The port is now locked to that display.
Note;
Multiple ports can be locked by clicking on the Include
check box relevant to the port, then clicking on Execute
to lock the ports.
UDM1604-USG – 2.0 - 0606 5-11