AMX Enova DGX 8 Instruction Manual page 203

To specify the root level folder for storing all Log files:
1.
Browse the parent directory for log files.
Once specified, the files are stored as follows:



Note: The "Diagnostic Log File Name" and the ".acp Log File Name" can be changed by editing in
place, but cannot have a specified path.
Zip Log Files
In the event that you need to zip a set of files and send them to technical support, use the Log File Zip
Utility dialog box to create a single archive file to email.
To zip log files:
1.
Select File > Zip Log Files.
2.
Under Include, click the check box for each of the files needing zipped.



3. Click Zip Files.
4.
Click Close.
Load Log Files (Emulation Mode Only)
To load log files:
1.
Select File > Load Log File.
2. From the Open dialog box, navigate to the location the application is storing the .apd files (the
default location is LogFiles > Activity in the installation directory).
3. Open the desired .apd and/or .zip file(s). The Status bar at the bottom indicates which file is being
processed (for example, "Processing file 2 of 3").
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
.apd files in a subfolder named "diagnostic"
.acp in a subfolder named "acp"
.log files in a subfolder named "activity"
Click individually or use any of the first three option buttons along the bottom.
Select multiple, consecutive files by holding down the Shift key and clicking the first and last
files in a range of files.
Select multiple, nonconsecutive files by holding down the Control key and clicking on
individual files.
Appendix C – APDiagnostics
197