AMX Enova DGX 8 Instruction Manual page 197

Information Pane
Instruction Manual – Enova DGX 8/16/32 Digital Media Switchers
The Information pane is the center panel in the Main Screen
and offers the next level of "drill down" into the system
status. Information pane buttons access information for each
of the specific group components listed. The type of
information displayed in the Information pane depends on
which tab is active in the Categories pane and which
Categories button is selected.
To display diagnostic information:
1.
In the Categories pane, select the Diagnostic tab.
2. Select either the Temperature or Power System buttons
as applicable.
3. In the Information pane:
a.
a. Click Visual to display visual details on the
enclosure in the System Visual pane.
For more information, see page 193.
b.
b. Click Plot to display a Plot View with a graph of
data points for information being gathered (Acquisition
mode) or already gathered (Emulation mode) for a
specific component. The data is date stamped as it is
added to the graph.
For more information, see page 192.
c.
c. Click Details to display a set of analog status meters
each representing current data for its associated
component. The meters provide an analog
representation of a component's current value with
respect to its Warning and Error setpoints. If the value
is below its minimum or exceeds its maximum
Warning or Error setpoint, the color of the meter
changes from green (Good) to yellow (Warning) or red
(Error), making it easy to identify problem areas at a
glance.
Appendix C – APDiagnostics
191