Using The Power Supply; Controlling The Outputs - Agilent Technologies N6705 User Manual

3 Using the Source Functions

Using the Power Supply

Controlling the Outputs

NOTE
60
The figures on the right apply to Agilent Models N678xA SMU.
Step 1 – Select an output:
Press one of the Select Output keys to select an output to control. The
lit key identifies the selected output. All subsequent output-specific
front panel commands are sent to the selected output.
Step 2 – Set the output voltage and current:
Turn the Voltage and Current knobs. The output voltage or current
setting changes when they are turned. These knobs are active in
Meter View, Scope View, and Data Logger mode.
You can also enter the voltage and current values directly in the
numeric entry fields (the Set fields) in the Meter-view display. Use
the navigation keys to select the field; use the numeric entry keys to
enter the value. The value becomes active when you press Enter.
Lastly, you can press the Settings key to access the Source Settings
window. Use the navigation keys to highlight the Voltage or Current
fields. Then enter the voltage and current values with the numeric
keys. You can use the Voltage and Current knobs to adjust the values
in the Voltage and Current fields. Press Enter to enter the value.
Push the voltage and current knobs to access a
pop-up dialog that lets you: 1. Lock/Unlock the
knobs. 2. Select limit parameters or select limit
tracking on Agilent N678xA SMU and N6783A.
Model N6705 User's Guide