Agilent Technologies N6705 User Manual page 192

Appendix B SCPI Commands
SCPI Command
STATus (continued)
:QUEStionable
[:EVENt]? (@chanlist)
:CONDition? (@chanlist)
:ENABle <NRf>, (@chanlist)
:NTRansition <NRf>, (@chanlist)
:PTRansition <NRf>, (@chanlist)
SYSTem
:CHANnel
[:COUNt]?
:MODel? (@chanlist)
:OPTion? (@chanlist)
:SERial? (@chanlist)
:COMMunicate
:RLSTate LOCal | REMote | RWLock
:TCPip:CONTrol?
:DATE <yyyy>,<mm>,<dd>
:ERRor?
:GROup
:CATalog?
:DEFine (@chanlist)
:DELete <channel>
:ALL
:PASSword:FPANel:RESet
:REBoot
:TIME <hh>,<mm>,<ss>
:VERSion?
TRIGger
:ACQuire
[:IMMediate] (@chanlist)
:CURRent
[:LEVel] <NRf>, (@chanlist)
:SLOPe POSitive | NEGative, (@chanlist)
:SOURce <source>, (@chanlist)
:TOUTput
[:ENABle] <Bool>, (@chanlist)
:VOLTage
[:LEVel] <NRf>, (@chanlist)
:SLOPe POSitive | NEGative, (@chanlist)
:ARB:SOURce BUS | IMMediate | EXTernal
:DLOG
[:IMMediate]
:CURRent
[:LEVel] <NRf>, (@chanlist)
:SLOPe POSitive | NEGative, (@chanlist)
:SOURce <source>
:VOLTage
[:LEVel] <NRf>, (@chanlist)
:SLOPe POSitive | NEGative, (@chanlist)
192
Description
Returns the value of the questionable event register
Returns the value of the questionable condition register
Enables specific bits in the event register
Sets the negative transition filter
Sets the positive transition filter
Returns the number of output channels in a mainframe
Returns the model number of the selected channel
Returns the option installed in the selected channel
Returns the serial number of the selected channel
Specifies the Remote/Local state of the instrument
Returns the control connection port number
Sets the date of the system clock
Returns the error number and error string
Returns the groups that have been defined (NOT for N678xA SMU)
Group channels to create a single output (NOT for N678xA SMU)
Deletes the specified channel from a group (NOT for N678xA SMU)
Ungroups all channels (NOT for N678xA SMU)
Resets the front panel lock password to zero
Returns the unit to its power-on state
Sets the time of the system clock
Returns the SCPI version number
Triggers the measurement immediately
Sets the current trigger level
Sets the current trigger slope
Sets the measurement trigger source <source> = BUS,
CURRent<n>,EXTernal, PIN<n>, TRANsient<n>, VOLTage<n>
Enables measurement triggers to be sent to a digital port pin
Sets the voltage trigger level
Sets the voltage trigger slope
Sets the arbitrary waveform trigger source
Triggers the internal data logger immediately
Sets the current trigger level of the data logger
Sets the current trigger slope of the data logger
Sets the internal data logger trigger source <source> = BUS,
CURRent<n>, EXTernal, IMMediate, VOLTage<n>, ARSK, OOOK
Sets the voltage trigger level of the data logger
Sets the voltage trigger slope of the data logger
Model N6705 User's Guide