The Rear Panel - At A Glance - Agilent Technologies N6705 User Manual

The Rear Panel – At a Glance
1
9 8
1 Cover screw
2 Digital Port connector
3 USB interface connector
4 LAN interface connector
5 AC input connector
6 GPIB interface connector
7 Trigger connectors
8 Aux Voltage Measurement
connector
9 Wiring access ports
WARNING
Model N6705 User's Guide
7
Facilitates top and bottom cover removal for power module installation.
Connects to the 8-pin digital port. Port functions are user-configurable. Refer to
appendix C for details.
Connects to USB interface. May be disabled from front panel menu. Option AKY deletes
the connector.
Connects to 10/100 Base-T interface. Left LED indicates activity. Right LED indicates
link integrity. May be disabled from front panel menu.
3-pin IEC 320 AC input connector. Power cord requires ground conductor.
Connects to GPIB interface. May be disabled from front panel menu.
BNC connectors for trigger in and trigger out signals. Refer to Appendix A for signal
descriptions.
Auxiliary voltage measurement connector. Only available on Agilent N6705B
mainframes for use with Agilent N6781A power modules.
Access for sense and output wire connections. Only available on Agilent N6705B
mainframes. Used for output connections on power modules rated > 20 A.
Also used for Agilent N678xA SMU power modules when extremely precise
measurements or output guarding is required.
SHOCK HAZARD The power cord provides a chassis ground through a third
conductor. Be certain that your power outlet is of the three-conductor type
with the correct pin connected to earth ground.
2 3 4
Quick Reference 1
5
6
17