Table of Contents
Advertisement
Configuring User Preferences
Front Panel Preferences
Model N6705 User's Guide
To configure the User Preferences, press the Menu key, scroll down
and select the Utilities item, then select User Preferences. Then
scroll to and select one of the following User Preferences:
The DC Power Analyzer has a front panel screen saver that increases
the life of the LCD display by turning it off during periods of
inactivity. As shipped from the factory, the screen saver comes on
one hour after activity on the front panel or interface has ceased.
When the screen saver is active, the front panel display turns off, and
the LED next to the Line switch changes from green to amber. To
restore the front panel display, simply press one of the front panel
keys.
Check Enable Screen Saver to enable the screen saver. Uncheck to
disable the screen saver. When enabled, enter a value in minutes in
the Wait field to specify the time when the screen saver will activate.
The wait can be set from 30 to 999 minutes in 1 minute increments.
Check Wake on I/O to activate the display with I/O bus activity. If
Wake on I/O is enabled, the display is restored whenever there is
activity on the remote interface. This also resets the Wait timer.
Check Lock Voltage and Current Knobs to disable the front panel
voltage and current knobs. This is useful if you wish to prevent
someone from changing the voltage or current settings if a test is in
progress. Uncheck to enable the voltage and current knobs.
Check Enable Front Panel Key Clicks to enable key clicks. Uncheck
to disable key clicks.
Under Default Meter View, you can specify if the instrument turns
on with single-output view or all-outputs view.
Using the System Functions 5
145
Advertisement
Table of Contents
