Table of Contents
Advertisement
3 Using the Source Functions
Arbitrary Waveform Parameters
88
Common Parameters
The following properties are common to most Arb functions:
Parameter:
Return to DC Value
Last Arb Value
Edit Points
Continuous
Repeat Count
Close
From the remote interface:
The parameter setting returns to the DC value that was in effect prior
to the Arb.
ARB:TERM:LAST OFF,(@1)
The parameter setting remains at the last Arb value after the Arb
completes.
ARB:TERM:LAST ON,(@1)
Create a user-defined current or voltage Arb from the present Arb
property values:
ARB:CURR:CONV (@1)
ARB:VOLT:CONV (@1)
Repeat the Arb continuously.:
ARB:COUN INF,(@1)
The number of times the Arb repeats.
ARB:COUN 10,(@1)
Description:
The parameter setting returns to the DC value
that was in effect prior to the Arb.
The parameter setting remains at the last Arb
value after the Arb completes.
Create a user-defined Arb from the present Arb
property values. This lets you edit specific
points in the standard arbitrary waveform.
Check to repeat the Arb continuously.
The number of times the Arb repeats. Except
for CD Arbs, the maximum repeat count is
about 16 million. The maximum repeat count
for voltage and current CD Arbs is 256.
Saves and closes the Properties window.
Model N6705 User's Guide
Advertisement
Table of Contents
