Agilent Technologies N6705 User Manual page 79

Using the Source Functions 3
Specify if the Arb should repeat, either continuously or only for a
specified repeat count. A repeat count of 1 runs the Arb once.
Step 3 – Exporting or importing User-defined Arb data
After you have configured the User-defined Arb, you can use the
Export button to save the Arb list to a file. Conversely, if you have
previously created or saved a User-defined data file, you can use the
Import button to import the Arb list.
Refer to "Importing and Exporting User-Defined and Constant-Dwell
Arb Data" later in this chapter for information on how to create .csv
current or voltage data files.
Select the Arb.csv file type format. When importing, specify the
output on which the User-defined Arb will run. When exporting,
specify the output from which you want to export the Arb.
Under Path/Filename, click Browse and specify the location where
the import file is located or where the export file will be placed.
Internal:\ specifies the instrument's internal memory. External:\
specifies the Memory port on the front panel.
Select Import to import the file. Select Export to export the file.
Model N6705 User's Guide 79