Table of Contents
Advertisement
1 Quick Reference
Meter View
Press
Meter View
This key
toggles
between
multiple and
single output
views
1
Output
Identifier
2
Output Status
3
Output Meters
4
Output
Settings
5
Interface
Status
6
Model Number
7
Arb, Delay, &
Slew Rate
Polarity Reverse
8
9
Ratings &
Protection
10
Other Outputs
18
1
2
6
7
8
9
Identifies the output. When an output is selected, the background becomes highlighted.
The selected output is displayed in an enlarged format in single output view.
Off: the output is off
CV: the output is in constant voltage mode
CC: the output is in constant current mode
Unr: the output is unregulated
CP+, CP–: a positive or negative power limit
CL+, CL–: a positive or negative current limit
VL+, VL–: a positive or negative voltage limit
Displays the actual output voltage and current. Displays power in single output view.
Displays the present output voltage and current settings. Turn the front panel voltage or
current knob to adjust these settings. Can also be changed using the numeric keypad.
Error – an error has occurred (press the Menu key, select Utilities, then Error Log)
LAN – the LAN is connected and has been configured
IO – there is activity on one of the remote interfaces
Identifies the model number of the power module connected to this output.
Displays the Arb waveform that is presently configured for this output. If no Arb is
configured, no waveform will be displayed. Also displays the Output On and Output Off
delay settings as well as the slew rate setting.
Indicates that the output and sense polarities are reversed.
Displays the maximum voltage and current ratings of the output. Also displays the
present over-voltage protection setting and whether over-current protection is on or off.
Displays the actual voltage, current, and status of the other outputs.
Multiple Output View
Single Output View
OV: over-voltage protection tripped
OV–: negative voltage protection tripped
OC: over-current protection tripped
OT: over-temperature protection tripped
PF: a power-fail condition occurred
Inh: an external inhibit signal is received
Osc: the oscillation protection tripped
Prot: a coupled output protect occurred
Model N6705 User's Guide
3
4
5
10
Advertisement
Table of Contents
