Table of Contents
Advertisement
1 Quick Reference
The Front Panel - At a Glance
2
1
1
Line switch
2
Display
3
Measure keys
4
Source keys
5
Menu, Properties, File
keys
6
Navigation keys
7
Numeric/Alpha Entry
keys
8
Voltage/Current knobs
9
Select Output keys
10
Emergency Stop
11
Memory port
12
On keys
13
Binding posts
14
4 Wire
15
All Outputs On/Off keys
16
Waveform Display
controls
16
3
4
5
16
15
Turns the instrument On or Off.
Displays all instrument functions - information changes based on selected function.
Selects the measurement function - Meter View, Scope View, or Data Logger.
Run/Stop key starts or stops the scope or data log measurement.
Programs the source function – Source Settings or Arbitrary waveform.
Arb Run/Stop key starts or stops the arbitrary waveform function.
Menu key accesses all mode controls via a hierarchical command menu.
Properties key displays information specific to the active view (this is a menu shortcut).
File key lets you save the current display, instrument settings, and measurements.
Navigate through the control dialog windows; press the Enter key to select a control.
Back key cancels the values entered into the dialog and backs out of the control.
Enters numeric and alpha values. Alpha keys automatically become active on fields that
allow alpha character entry. Repeatedly pressing the key scrolls thorough the selections.
Sets the voltage and current of the selected output.
Selects an output to control. The lit key indicates the selected output.
Turns off all outputs without any delays; aborts any arbitrary waveforms.
USB Memory device connector. Option AKY deletes the connector.
Turns individual outputs On or Off; outputs are on when the key is lit.
+ and – output and sense banana terminals for all outputs.
Indicates that 4 Wire sensing is enabled on the output.
Turns all outputs On and Off according to the specified turn-on and turn-off delays.
Controls the scope and data logging views.
Vertical knobs control the vertical size and position. Press Offset to set marker 1.
Horizontal knobs control the horizontal size and position. Press Offset to set marker 2.
The Trigger knob moves the trigger level up or down. Press this knob to autoscale.
6
7
8
14
13
Model N6705 User's Guide
9
10
11
12
Advertisement
Table of Contents
