Table of Contents
Advertisement
Appendix C Using the Digital Port
206
N6705A #1
1
2
3
4
5
6
7
I
On Couple
Off Couple
I
From the front panel:
To configure the digital connector pins, press the Menu key, scroll
down and select the Utilities item, then select Digital I/O. Then
press Enter.
Select pin 6 from the Pin dropdown list. Then select the On Couple
function for the pin the from the Function dropdown list.
Select pin 7 from the Pin dropdown list. Then select the Off Couple
function for the pin the from the Function dropdown list.
Repeat these steps for mainframes #2 and #3.
From the remote interface:
To configure the On Couple function for pin 6 and the Off Couple
function for pin 7:
DIG:PIN6:FUNC ONC
DIG:PIN7:FUNC OFFC
Repeat these commands for mainframes #2 and #3.:
Operation
Once configured and enabled, turning the output on or off on any
coupled output will cause all coupled outputs on all configured
mainframes to turn on or off according to their user-programmed
delays. This applies to the front panel On and Off keys, the Web
server, and to SCPI commands.
Turning the outputs on or off using the front panel All Outputs On
and Off keys will cause all coupled outputs as well as non-coupled
outputs on that mainframe to turn on or off.
N6705A #2
1
2
3
4
5
6
7
I
N6705A #3
1
2
3
4
5
6
7
I
Model N6705 User's Guide
Advertisement
Table of Contents
