Agilent Technologies N6705 User Manual page 89

Model N6705 User's Guide
Step Parameters
Parameter:
Start Setting (I or V )
0 0
End Setting (I or V )
1 1
Delay (T )
0
From the remote interface:
The setting before the step:
ARB:CURR:STEP:STAR 0,(@1)
ARB:VOLT:STEP:STAR 0,(@1)
The setting after the step:
ARB:CURR:STEP:END 1,(@1)
ARB:VOLT:STEP:END 5,(@1)
The delay after the trigger is received before the step occurs:
ARB:CURR:STEP:STAR:TIM 0.01,(@1)
ARB:VOLT:STEP:STAR:TIM 0.01,(@1)
Using the Source Functions 3
Description:
The setting before the step.
The setting after the step.
The delay after the trigger is received before
the step occurs.
89