The Rear Panel At A Glance - Agilent Technologies E4419B User Manual

1 Getting Started

The Rear Panel at a Glance

1 Channel A (Option 002 or 003 only)
2 Channel B (Option 002 or 003 only)
3 Power Ref (Option 003 only)
4 Recorder Outputs
5 Power socket
6 Fuse
7 GPIB
16
1
10 9
The power reference output is a 50 Ω type-N connector. The output signal is
used for calibrating the sensor meter combination.
These outputs produces a DC voltage that corresponds to the power level of
the channel input. Refer to
information.
This power meter has an auto configuring power supply. This allows it to
operate over a range of voltages without manually being set to a certain
voltage.
An F3.15AH fuse is installed for all voltage supplies.
This connector allows the power meter to be controlled remotely using the
General Purpose Interface Bus.
2 3 4
N279
8
"Recorder Outputs"
5
7 6
11
on page 92 for further
E4419B Power Meter User's Guide